We all face problems with our appliances from time to time. Hoover washing machines perform really well but might also present issues now and then.
If your Hoover washing machine won’t spin, there are quite a few things worth checking that might solve the issue. A spin problem could be caused by a few different errors, so you’ll need to spend some time investigating your appliance.
First, it’s essential to differentiate between the washing machine drum not turning at all (during washing and rinsing) and the drum simply not spinning fast enough at the end of the cycle.
If your drum doesn’t revolve at all during a cycle, then you are probably dealing with a drive belt issue. In this case, you must adjust or replace the drive belt.
However, if you’re just missing a fast spin cycle at the end of your wash, you could be dealing with a few different issues. Here’s what you need to know to get back to doing your laundry fast.
Common Reasons for Your Hoover Washing Machine to Stop Spinning
There always has to be a specific cause for washing machines to stop spinning. Here are a few of the most common reasons why this happens with Hoover washing machines.
Water Not Draining Correctly
First of all, there could be an issue with the drain filter. If the water doesn’t drain completely from the drum, then the washing machine will not be able to complete the spin cycle.
Make sure to check if there is a lot of water left inside at the end of the cycle – this could indicate a drain issue. Listen to whether you can hear the pump running and the water draining out.
If you can’t, you will need to check out the drainage filter. If something is blocked, this is most likely the problem. There might be a blockage somewhere in the drum or drain hose or something jammed inside the pump.
Start by taking the time to manually drain the water via the pump filter drain tube, and then assess where the blockage might be.
Load Out of Balance
If you notice that the water has drained out of the washing machine, but it still won’t spin at the end of the cycle, then you might wait to check the wash load.
If your load is too small or even too heavy, the appliance will refuse to spin for balance protection. This helps to prevent serious damage to the washing machine itself.
In these cases, there is no actual fault with the machine but rather just an unbalanced load. This generally happens when you wash single, heavy items or a very small load of clothes.
Try to add more clothes and balance the load evenly and see if the spin cycle works after making this change.
Pressure System Fault
Another issue you could be having is a pressure system fault, which is caused by a faulty pressure switch. There are certain components on a washing machine, such as the pressure sensor, that have to send a signal to one another, and these can sometimes fail.
If the turning stops a few minutes into your wash cycle, this could be the problem.
In these cases, you will usually need to repair your washing machine by calling for support from a professional who has experience fixing this type of problem. A repair like this is typically inexpensive and worth the money to avoid replacing your whole appliance.
Faulty Motor
If your washing machine is making strange crackling sounds during the cycle or appears to be struggling to spin, there might be a problem with the motor or carbon brushes.
Worn-out motor brushes or carbon brushes can cause the appliance to struggle to get up to speed for the spin cycle or even fluctuate in speed throughout the entire wash.
If your motor is sparking, you’re probably dealing with worn carbon brushes. However, even if your machine has a brushless motor, you should still check that your motor works.
If your motor is sparking excessively, you’ll need to call an engineer who will be able to help you solve it. It’s important to be aware that calling for professional help in these circumstances is always best for your health and safety.
Slipping Belt
Another problem that you might identify is a slipping drive belt. This typically happens if the belt is worn and loses grip.
You’ll be able to see if this is the problem by removing the back panel of your washing machine, turning on the power, and checking to see if everything looks normal or if the belt is loose.
If you notice an issue with the belt, you will need to have it replaced. However, a washing machine repair of this sort can cost a lot of money, and it might be worth it to replace the machine.
How to Solve Hoover Washing Machine Spinning Problem
As you can see, there are many potential issues that might be causing the problem if your appliance won’t spin. If you’re experiencing this issue, here are the steps you should take.
Check the Load Size
The first step is to consider the size of your load to ensure that the balance is normal. Add more clothes or remove heavy items from a small load, or remove some clothes from a heavy load.
If after making this change, the machine spins normally, then you know it was only a load-balancing issue.
Check the Programme
If you’ve changed the amount of clothes in the drum to a suitable amount and it still won’t spin enough at the end of the cycle, then you should check the details of the programme you’ve selected.
On the washer is a ‘spin speed’ button which allows you to change the spin speed. This option also allows you to turn off the spin so the clothes will still be wet when they come out of the washer.
You may have also selected a ‘quick was’ programme which runs only 14, 30, or 44 minutes in length. These cycles work well for smaller loads but only do low-speed spins in order to protect delicate garments.
If you want a full-speed spin, be sure to select a normal wash cycle.
Check the Drain Pump Filter
The next best step is to check your drain pump filter. Do this by locating the filter flap at the left-hand side of your machine, at the very bottom.
By opening this flap, you’ll be able to clean the filter out (be sure to have a dish to catch the water), and you can also assess if there is something blocked and attend to the issue.
After this, you can also check the sump hose for any blockage there.
Check the Motor
As mentioned, you may also want to check for sparks coming from the motor of your machine. This will indicate a motor or motor brush issue, for which you will need to call an engineer.
This problem should also be indicated by an error code on your machine.
Hoover Washing Machine Error Codes to Look Out For
If your washing machine is displaying a fault code, this can help you identify certain issues that could be causing the spin to not work.
Hoover Washing Machine E03: Drain Problems
This error code indicates that the water cannot drain properly. This could imply faulty wiring to the drain pump, a blocked pump, or a fault in the pump itself.
This is a sign to check your filter as well as the hose.
Hoover Washing Machine E08: Motor Problems
If your washing machine has a motor issue, you should see the E08 error code on the display.
As mentioned, this could have to do with motor or carbon brushes and will require the help of a professional.
Hoover Washing Machine E16: Water Heater Problems
Another problem that you might be facing with your machine is a water heater problem, which will be indicated by the E16 code.
While this usually won’t affect the spin on your cycle, it will help you to identify a fault in your heating element, such as a blown fuse.
This is an important problem to address as quickly as possible to avoid serious damage to your machine.
Final Thoughts
There are plenty of possible solutions to a spinning problem on your Hoover washing machine, and it’s important that you rule out the simple solutions before calling in for help.
Oftentimes, you’ll just need to check your load size and programming in order to resolve the problem.
However, if this doesn’t do the trick, then knowing the potential cause of the issue beforehand can assist an appliance repair company to fix your machine faster.
