Smeg is an Italian appliance manufacturer renowned for its stylish, high-quality, contemporary appliance designs. Smeg offers kitchen appliances of all sorts – from toasters and kettles to residential dishwashers.
Smeg dishwashers have electronic control panels and typically work exceptionally well, but as with any appliance, you may always run into issues, particularly with the dishwasher control panel.
If you’re in the process of troubleshooting an issue with your Smeg dishwasher, a good place to start is completing a dishwasher reset.
There are several issues that can be solved with a simple reset which is performed by pressing and holding the reset button for a few seconds.
If you’re looking for more details or need to answer questions you might have about performing a reset, keep reading.
Simple Steps to Reset Smeg Dishwasher
Resetting your Smeg dishwasher is a quick and easy process that will take no time at all.
- First of all, start by making sure that your dishwasher door is closed. You can open the dishwasher and then quickly close it, making sure that that latch engages.
- Next, with the door closed, turn off the power to the dishwasher. You can either unplug it from the wall or turn off the circuit breaker where the power supply connects.
- Leave the power disconnected for a minute or two. This will allow for any residual energy to dissipate and helps to reset the dishwasher’s control panel.
- Once you have turned the power back on, find the reset or “On/Off” button on the left side of the dishwasher control panel. The location of this button can differ depending on the model of the Smeg dishwasher, so be sure to check the instructions manual to help you locate it.
- Press and hold the “On’Off” button for a few seconds. The indicator light on the control panel may flash to indicate that a reset is taking place.
- Release the “On/Off” button after a few seconds. The control panel should now be reset to the default settings and able to run a new cycle.
- Make sure that the dishwasher door is closed, and then select a new wash cycle to check if your problem has been solved.
Issues Solved By a Smeg Dishwasher Reset
Now that you know how to complete a dishwasher reset successfully, you might be wondering what good this can do for you.
There are quite a few instances in which a dishwasher reset can help you make sure your Smeg is working properly.
Here are a few of the issues that can be solved by completing a Smeg dishwasher reset.
Program Delay Timer
Smeg dishwashers have a delay timer function that allows you to start your cycle at a specific time of day. When it’s set, this will prevent a cycle from beginning until the specified time.
You may have accidentally set this timer or changed your mind about wanting to use it.
If this is the case, you’ll need to cancel it. You can do so by performing a dishwasher reset. However, there is another way to cancel the timer.
- Check the programming buttons on the left side of your machine, and press and hold the “Start/Pause” button on the control panel until it shows a solid light.
- Press the “delay start” button as many times as needed until the display shows “0” instead of a time, such as 4 hours.
- Make sure to consult your user manual to confirm these steps, as they may vary between different models.
Control Panel Issues
Another reason to reset your Smeg dishwasher is to solve any control panel malfunctions.
If your dishwasher’s control panel is not responding or perhaps showing an error code, a reset might be required to clear the error and restore the panel’s functionality.
Any number of things might cause your dishwasher to abruptly stop a dishwashing cycle in the middle of its program.
In order to clear the program and reset the machine, you might need to complete a reset. This can help you to end the cycle and start it from the beginning. You might also wish to start a different cycle, and this is a good way to do so.
If you have had an interruption to your power supply, this can impact a running dishwashing cycle by pausing it or stopping it altogether.
If you’ve had a power outage or other kinds of power interruptions while your dishwasher was running, you can complete a reset to restore normal operation.
Keep in mind that this will reset your dishwasher and not simply resume the cycle you were running. You will instead need to start the cycle over from the beginning.
Water Supply Issues
Like power interruptions, you might face interruptions or other issues relating to your water supply, which can halt your cycle or impact your dishwasher in other ways.
You might be struggling with low water pressure, a blockage in the pipes to prevent the water from draining, or even a burst pipe. Make sure you find out what the situation is with your water before progressing. It’s important that your Smeg dishwasher is able to drain water properly.
The anti-flood device in your dishwasher will typically pick up on water issues automatically and send an error code to your dishwasher control board, which will alert you to the issue at hand.
Once the water issues have been cleared, and you’re certain that water will pump into your machine again, resetting the machine is the next step.
If you experience any other issues with your Smeg dishwasher, such as strange noises, a lack of hot water, poor cleaning performance, etc., then resetting it might be a quick fix before you have to inspect it further.
If resetting your dishwasher isn’t fixing the problem, you may need to look for answers from a professional.
Other Smeg Dishwasher FAQs
If you own a Smeg dishwasher and have been experiencing problems, here are a few other frequently asked questions that might help to fix any problems you’re having.
What Can I Do if My Smeg Dishwasher Won’t Start?
There are a few steps you can take if your dishwasher won’t start.
- Make sure that your dishwasher is plugged in and turned on before attempting to start a dishwashing cycle.
- If your Smeg dishwasher doesn’t start, then resetting it might fix the problem. It’s always a good idea to run a drain cycle for 90 seconds before trying to start your dishwasher again.
- Ensure that the door latches properly. The door latch assembly holds the door closed during a dishwashing cycle to prevent leaking. When the door isn’t closed, the dishwasher won’t receive power.
If none of these steps solve the problem, get in touch with a professional who has experience fixing Smeg dishwashers.
How Does the Anti-Flood Device Work?
The anti-flood device located in your Smeg dishwasher is designed to prevent water damage in the event of a leak, drain pump issue, challenges with the water inlet valve, etc.
It’s an important safety feature that can protect both your appliance and your home from water damage.
The anti-flood device sends a message to your dishwasher control board in the event of a leak or other water-related issue, which will then present an error code on the dishwasher.
Use this information to locate the water issue and fix it. Once the issue is resolved, you can perform a dishwasher reset.
What if My Dishwasher Doesn’t Respond to a Control Panel Reset?
You might face the issue of your dishwasher not responding to you resetting it. In this case, you could ret resetting your Smeg from your electrical service panel, instead of the control panel.
Simply locate the circuit board and the circuit breaker switch that supplies electricity to the dishwasher.
To perform the reset, quickly press the switch “Off” and then press it back “On.” This should do the trick.
Oftentimes, what you may think is a serious issue with your appliance can be quickly and easily solved by resetting the machine.
However, just because resetting it doesn’t work, doesn’t mean that it’s broken either. You might need to try some other troubleshooting or get in touch with a professional who will be able to repair it for you.
If you don’t want to have to replace your machine, make sure to maintain it well and call for professional help as soon as possible when you face issues that can’t be solved in a few easy steps. Getting help will prevent further breakage and save you a load of stress as well.