A clean vacuum cleaner means a clean home. If you own a Dyson vacuum cleaner, make sure to clean it regularly to protect its sensitive parts from getting damaged by stubborn grime. It’s important to know how to clean a Dyson vacuum cleaner the right way.
The cleaning process starts with emptying the dust canister – but that’s not all. The container deserves a good cleaning. You must also clean the filter, brush bar, and hose, besides wiping the whole body of the unit.
The process of cleaning Dyson vacuums can remain simple and swift even if you’re not a cleaning expert. Let’s take a look at the steps in detail.
How to Clean A Dyson Vacuum Cleaner – Step-by-Step Guide
Before you learn how to clean a Dyson vacuum, you must first assemble everything you’ll need to get the job done. Here’s a list –
- Damp microfibre cloth
- Clean and dry cloth to wipe off excess water
- Trash can
- Access to cold and warm water
- A pair of scissors
- Mild disinfectant (like vinegar)
- Access to a washbasin and sink
To clean your Dyson regularly, you can take the following steps –
1. Unplug and Dismantle the Vacuum Cleaner.
The first step is easy and a no-brainer. You need to turn the Dyson off and unplug it from the power socket.
Then, once you’ve made sure that the device is not on, start taking it apart and removing the vacuum hose, crevice nozzles, and other accessories. Don’t forget to remove the dust canister by pressing the red bin release button that Dyson vacuum cleaners usually have.
2. Empty and Wash the Dust Canister.
Hold the dust canister of your Dyson vacuum cleaner directly above the trash can. Then, press the release button so that the bottom of the canister opens and lets the collected trash fall straight into the trash can.
If required, gently shake and tap the canister to get rid of as much dirt stuck inside as possible. After that, detach the canister from the Cyclone and clean it with cold water.
You can use a brush to loosen the dirt – and then rinse it before setting it to dry. Here’s a video that shows how to clean Dyson V6’s canister.
3. Clean the Dyson Cyclone.
Next, examine the Cyclone section of the Dyson and see if there’s any debris or mess stuck to some part. An air compressor can help you clear this.
The compressed air will help loosen the excess dust and ease the cleaning process. In the absence of an air compressor, you can use a hair dryer in cold mode, but it won’t be as effective.
Then, using a damp microfibre cloth, wipe the Cycle gently to remove all the dirt and dust particles from the machine. Check out the video to learn how to clean Dyson Cyclones.
4. Remove and Wash the Dyson Filter.
Every Dyson vac cleaner is equipped with a HEPA filter that captures microscopic particles. To clean it, you have to locate the Dyson vacuum filter.
It is usually near the Cyclone. In some models, there are two Dyson filters inside the side housing or ball.
Unscrew and loosen the Dyson filter and hold it under running water to rinse it. Dyson recommends that you should avoid harsh detergent or soap for cleaning the vacuum filter.
Keep rinsing the washable filter under warm tap water until the water runs clear. Then, wipe it with a dry cloth and set it aside.
Give it a day to completely dry before you attach it back. Here is a look at how to clean Dyson V7 filter to help you get an idea of the process.
5. Disentangle the Brush.
The brush roll of your Dyson vacuum picks up pet fur, hair, trapped dust, etc., from hard floors and carpets. These strands often get entangled in the bristles and around the bar.
Dust and fuzz often make the tangles in all the hair even worse. So, you must eliminate these from the brush. For that, you will need to use a flathead screwdriver to detach the brush.
In the absence of a flathead screwdriver, you can use a coin. Then, start pulling out the strands around the brush – and use a pair of scissors to release the difficult strands and knots.
Use a damp cloth and a brush to clean more thoroughly and allow it to air dry completely before putting the brush back. Here’s a video on how to clean a Dyson DC40 brush.
6. Unclog the Vacuum Hose and Wand.
The hose and the wand of your Dyson vacuum need thorough checking and cleanup every now and then. Otherwise, you will end up with blockages in them.
Once you have separated the hose and the wand from the vac’s body, look through them and pull out anything inside by hand. If that doesn’t seem possible, use a stick, long brush, damp microfibre cloth, etc., to trap and remove the debris inside.
Leave the parts in a warm area to dry before reattaching them to the vacuum cleaner. If you’re confused, this video of how to clean Dyson Ball’s hose might help you.
7. Clean the Other Parts.
Cleaning the vacuum is a good opportunity to pay attention to the smaller parts of the machine. You can disinfect the wheels, soleplate, etc., so they do not spread germs throughout the house or cause blockages.
You should push anything clogging your Dyson vacuum up using something like a broomstick. Check properly for blockages in any part of the vac.
Blockages and clogs in attachments like the crevice tool can lead to poor suction. Remove any dust, hair, or debris from the attachments with the help of a cloth, warm water, or a mild disinfectant.
8. Wipe the Machine Down.
Finally, it’s time to give the Dyson vacuum cleaner’s body a wipe-down. For that, use a damp microfibre cloth to wipe off any debris.
Gently rub off any spot that refuses to go with the help of the cloth. And don’t forget to clean and disinfect the handle.
Tips for Cleaning Dyson Vacuum Cleaner
Here are a few things to remember when you decide to clean your Dyson – and after you’re done:
- Cleaning your Dyson vacuum isn’t just about emptying the canister but also about washing and clearing its parts to free them from stains, germs, clogs, etc.
- Do not use harsh chemicals or soap to clean the filter, Cyclone, vacuum body, etc.
- Water and a damp cloth are ideal for cleaning Dyson cleaners. You can also use a mild disinfectant like distilled vinegar.
- Always empty the filter near an open window to prevent the dust and dirt from getting trapped inside the house.
- Once washed and wiped dry, keep the vacuum parts in a warm place for 24-48 hours before they are thoroughly dry.
- Do not attempt to dry the parts with the help of a tumble dryer, hair dryer, microwave oven, etc.
- When you clean the Dyson, pay attention to the machine to identify any problem that might have developed in the parts.
- It is a good idea to change the filter once every year, besides cleaning it regularly.
- Avoid using the high-power mode too often to prevent clogging the filter, as this mode is not designed for regular usage.
How Often Should You Clean Your Dyson Vacuum?
As you have understood, there are different steps to clean a Dyson vacuum. Thankfully, you don’t have to do all of them every time. Here’s when you should implement the cleaning steps –
- Clean the brush bar and bristles after every hoover use.
- Empty the dust canister after a few uses when it is two-thirds full.
- Wash and air dry the vacuum filter every three months. Clean it thoroughly every year.
- Clean individual parts frequently at gaps of every few months.
- Give the entire machine a thorough cleanup once every 12-18 months.
If you frequently clean the Dyson vacuum filter, canister, hose, etc., individually, you will need fewer sessions to deep clean the device.
Why You Should Clean Your Dyson Vacuum Regularly
Now you know how to clean a Dyson hoover and how often you should do it. But you may wonder – why is it even necessary to clean a device that itself is a cleaner?
a) Clean Appearance
The most obvious reason is to prevent loose dust from turning into stubborn spots and making your Dyson look old and blotchy. If you clean the machine regularly, it will continue to look new forever!
b) Preventing Malfunctions
There are other reasons not to let the microscopic particles and large debris settle in the vac. They can settle in the charging port, motor, etc., and cause issues in connectivity, rotation, suction power, function, and charging.
c) Hygiene Maintenance
Your vacuum and its brush roll might become the breeding ground for germs and bacteria, including faecal bacteria. It could also be hiding toxic mould and making your allergies worse.
d) Early Detection of Problems
When you clean your Dyson vacuum cleaner, you will likely notice any fault that might have developed in the machine. You’ll be notified of malfunctioning filters, leaky attachments, etc., which you can address instantly.
So keeping your Dyson vacuum completely clean is essential for the maintenance of the device. It can also effectively keep the environment in your house free from harmful microorganisms.
Now that you know how to clean a Dyson vacuum cleaner, you probably realise that there’s no reason to avoid the process. So make sure to clean a Dyson vacuum the way we have explained – and just as often.
A properly cleaned vacuum cleaner remains germ-free. And it can deliver powerful suction and maximum efficiency as it traps dust and dirt easily.
1. How do you clean Dyson Animal vacuum cleaners?
Dyson vacuums, including the Animal range, are easy to clean. First, empty the canister and wash it. Then, clean the Dyson filter and other attachments like the hose, wand, brush, etc. Make sure they are completely dry before you reassemble them and get the machine running.
2. Can you clean the inside of Dyson vacuums?
You can separate the parts of Dyson vacuums and clean each of them individually. Wipe or cleanse the dust canister, Cyclone, hose, want, filter, and accessories on the inside. But you must not use soaps and chemicals. Always refer to the manual to know where you should avoid water.
3. How do you unclog the inside of a Dyson vacuum cleaner?
To unclog the inside of a Dyson vacuum cleaner, remove the dust canister and check the openings of the Cyclone section. You will be able to see any large object that might be in the airway. Also, check the hose, wand, and other parts of the vacuum to spot and remove the blockage.
4. How do you clean the Dyson V1 filter?
Cleaning a vacuum cleaner’s filter is crucial for its maintenance. Here’s how to clean Dyson V11 filter: locate the filter at the back and remove it from the machine by twisting it. Tap off all the dust and dirt from the filter and rinse it. You don’t need soap for this. Then, put the filter back.
5. How can you dry the Dyson parts quickly after you have cleaned the machine?
It is essential to thoroughly dry freshly cleaned parts of a Dyson vacuum cleaner before you reassemble the machine and plug it into the power socket. But this must be done through air drying. There’s no shortcut like using a hair dryer. Keep it in a warm, dry place for at least 24 hours.
6. Can I wash the Cyclone part of a Dyson with water?
The Cyclone part in a Dyson uses centrifugal force to remove the finest particles. You can clean it using water. But we recommend not to do so as the water often mixes with the debris and forms mushy, which is harder to remove. So dusting or blowing away the debris will work better.
7. How do I stop my Dyson vac from smelling?
If your Dyson vac has started to smell, it’s because the appliance has a load of debris inside. And it has probably become home to odour-generating bacteria, mould, or germs. To remove the smell, clean the hoover thoroughly. To prevent it from happening again, make sure to clean it regularly.