Beko is one of the popular washing machine manufacturers that offer a wide and reliable product range. Sometimes users may encounter drainage issues with their washing machines. But you should not panic when your Beko washing machine is not draining.
The issue can be the result of a clogged pump filter, a damaged drain outlet, or improper installation of the drain hose. You have to look for the root cause to take the necessary steps to resolve the issue.
There are several reasons that can lead to the Beko washing machine not draining issue. Here, in this guide, I will explain all the steps to resolve it in detail.
Reasons Your Beko Washing Machine is not Draining and How to Fix It
Clogged Pump Filter
A clogged pump filter can lead to ineffective drainage of the washing machines. Lint from your laundry, debris and other foreign objects like coins, hair clips, and other metal objects can obstruct the path.
How To Locate it?
- Turn off your Beko washing machine’s power supply and remove the plug.
- Locate your washing machine’s cold water supply feed and turn it off. It will be present on the back side of your washing machine.
- Move to the bottom right corner of your washing machine and open the flap.
- Now, you can access your washing machine’s filter. Make sure that you remove the water from the drum before accessing the filter using the emergency drain hose.
How To Fix It?
- Take out the filter slowly by turning it in the anti-clockwise direction. If you feel some resistance, then the filter is blocked. It is the main cause of excess water in your drum.
- Special note: Keep a dry sponge or towel to clean the spills from the filter.
- Use a soft brush to clean the filter. Rinse it with water and soap solution. Also, clean the impeller and the filter cavity properly. Make sure that the impeller moves freely without any resistance.
- Now put the filter back and turn it clockwise to lock it properly.
Now run your Beko washer-dryer on full wash cycle mode. Keep an eye on the filter for any leaks. Hopefully, cleaning the filter will resolve the issue. If it persists, then you have to check the drainage pipework.
Damaged Or Jammed Drainage Pipework
A damaged, kinked, bent or twisted drain pipe can obstruct the flow of draining water. You can replace it to solve the issue.
Besides this, dirt, lint, grime, or scum can deposit in the drainage pipework and obstruct the flow of draining water.
How To Locate It?
The drainage pipework is either installed on the back of the unit or beneath your sink.
Drain Hose Under The Sink
- First, remove the power supply to avoid any accidents.
- Now, look for the main cold water supply and turn its tap off to block the water feed to your washing machine.
- Locate the drain hose under your sink and remove it from the connector.
Drain Hose Behind Your Machine
- Disconnect your appliance from the power supply and pull it forward to access the drain hose.
- Make sure that the hose does not extend far out from the recommended distance, which is mentioned in your instruction manual. Click here to get the manual of your model.
- Pull out the drain hose from the main waste pipe.
How To Fix It?
- Use a bucket to collect the remaining water and clean all the smudge and grime.
- Locate the U-bend in the pipework and remove it to clean all the debris and sludge. Clean everything properly with hot water and soap solution.
- If the U-bend or drain hose is damaged, replace it with a new one.
- Put everything back in its place.
- Take your dirty clothes and run the wash cycle on your washing machine to check whether the issue is resolved.
Influx Of Wastewater
If the filter is clean and the drain hose is functioning correctly, then wastewater is flowing back to the drum of your appliance. Here are the two common reasons for the backflow and the steps to fix them.
Blocked Waste Outlet
If any foreign element blocks the waste outlet, it can cause a backflow of water.
How To Fix It?
- Check the main waste outlet where the water drains out. If anything is causing an obstruction, remove it.
- Also, check the waste pipe connecting to your machine. If it is clogged, then clean it properly to resolve the issue.
- In case it isn’t easy to access the main outlets, call a professional for help.
Incorrect Setup Of The Drain Hose
Sometimes the drain pipe is not connected correctly, and it can cause water siphonage.
How To Fix It?
- Locate the drain hose of your appliance and ensure that it is not inserted more than 15 cm in the waste pipe.
- Moreover, the drain pipe of your machine is connected at the correct height. The height point should lie between 40-100 cm from the ground level. Place everything correctly and check whether the issue is resolved or not.
Faulty Machine Pump
If the issue persists after following all the steps mentioned above, then there is a high chance that your machine pump is not functioning correctly. It can be faulty, damaged, or broken, requiring proper repair or replacement.
How To Fix It?
It is best to call a professional to inspect the issue and take the necessary steps.
Tips To Maintain Your Beko Washing Machine And Prevent The Draining Issue
- Clean the filter regularly to avoid any excess build-up of sludge and debris.
- Use the emergency drain hose to drain all the water from the drum. You can access it inside the flap located on the machine’s front side. Unclip the small hose and pull it out. Keep a tray beneath it and pull the plug out. The water will start coming out of the drain pipe. Once the water stops, put the cap back and clip the tube to its position.
- It would be best to clean the detergent dispenser to avoid unnecessary dirt entering the filter. Here is a video link to clean the dispenser.
- Use the Drum Clean program after every two to three months to clean everything and avoid any scum and dirt build-up.
- If you don’t have this program in your machine, use the cotton program with the extra rinse feature. Set the temperature above 70 degrees, and do not put any clothes in your washing machine. Add 100 grams of anti-limescale powder and run the cycle. It will clean the drum, pipework, and drain hose of your unit.
Final Verdict
When you face a drainage issue with your Beko washing machines, these are the common steps to follow to find the cause and resolve it.
Go through the whole guide and follow all the steps carefully before calling for professional help. Sometimes, you can resolve the issue yourself, saving you money and time.
FAQs
Q: Can I drain the machine manually?
A: Yes, you can drain your machine manually. Open the filter tray on the bottom right side of your unit. Locate the drain hose and use it to drain the water from the drum.
Q: How to drain a Beko washing machine?
A: You can click on the cancel button to stop the cycle and drain the machine. If you are facing any issue with the draining of your unit, follow the steps mentioned above to find the cause and resolve it.
Q: How can I reset my Beko washer?
A: You can press the start/pause/cancel button and hold it for 3 seconds to reset the machine. Sometimes, resetting the device can resolve several issues.
